Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual

The “hwconfig” command displays the current hardware configuration. The display includes a list of 
disk drives, power supply units, hot swap controllers, and installed blades.

Upon typing 

hwconfig

 and pressing Enter, depending on your system you see either 

 or 

meetingplace:tech$ hwconfig

Cabinet:                Motorola CPX8216T

Bus architecture:       CompactPCI

Processor card:         CPV5370 S/N=5129443

    Processor:          Pentium III, Model 8, 700 MHz

    Memory:             512MB

    Temperature:        31C

    Voltages:           3.32V, 5.02V, 12.06V

Power Supplies:

    PS1:                OK, fan is OK

    PS2:                OK, fan is OK

    PS3:                OK, fan is OK

SCSI Adapter:           NCR 810

    DISK 1:             36000MB (SEAGATE  ST336704LW       REV=0004)

    DISK 2:             36000MB (SEAGATE  ST336704LW       REV=0004)

    Solid State Disk:   IMPERIAL "MG-35/400 ULTRA" S/N=0128 REV=B403

                        Battery: usage = 307 days, charge is OK

Ethernet:               Intel 8225x PCI 10/100 (0001af03c05e)

Modem:                  Absent or unrecognized

Smart Blades:

    Slot 16:            NMS CG6000C S/N=20363257 REV=5894-B2 MSC0 PRC0

    Slot 15:            NMS CG6000C S/N=20363261 REV=5894-B2 MSC1 PRC1