Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
3-12
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 3 Installing the 8112 Server
Unpacking the 8112 server
Step 5
Remove the plastic covering.
Step 6
Lift the server carefully out of the carton and move it close to the location designated for the installation.
Inspecting for damage
Visually inspect the server for damage. If the server is damaged or scratched, call the Cisco TAC for
instructions.
instructions.
Verifying the contents of the boxes
Inspect the contents of the boxes to make sure the following are included:
Note
These items are shipped in two separate boxes.
•
8112 server
•
two sets of rack mount rails with 18 Phillips-head screws
•
SCSI cable
•
power cable
•
external modem and cables (modem power cable, modem cable, and telephone extension cable)
•
IP LAN cables for Multi Access Blades (for systems using IP ports). These IP LAN cables connect
the Multi Access Blade to the customer’s LAN
the Multi Access Blade to the customer’s LAN
Note
The number of IP LAN cables you receive depends on the number of ports purchased for
your system. You need one IP LAN cable for every Multi Access Blade in your system.
your system. You need one IP LAN cable for every Multi Access Blade in your system.
•
T1 CAS telephony cables for T1 Smart Blades (for systems using T1 CAS ports). These T1 CAS
telephony cables connect the T1 Smart Blades to the customer’s system
telephony cables connect the T1 Smart Blades to the customer’s system
Note
The number of T1 CAS telephony cables you receive depends on the number of ports
purchased for your system. You need one T1 CAS telephony cable for every 24 PSTN ports
being activated.
purchased for your system. You need one T1 CAS telephony cable for every 24 PSTN ports
being activated.
•
E1 telephony cables (for systems using E1 ports). These E1 telephony cables connect the front of
the breakout box to the customer’s system
the breakout box to the customer’s system
Note
The number of E1 telephony cables shipped with your system depends on how many Multi
Access Blades are in the system. Sixteen cables are shipped for each Multi Access Blade.
Access Blades are in the system. Sixteen cables are shipped for each Multi Access Blade.
•
T1 PRI telephony cables (for systems using T1 PRI ports). These T1 PRI telephony cables connect
the front of the breakout box to the customer’s system
the front of the breakout box to the customer’s system