Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
3-14
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 3 Installing the 8112 Server
Mounting the 8112 server
Figure 3-6
8112 Server’s Physical Characteristics
Mounting into a frame relay rack
The 8112 server can be mounted in either a 19 or 23-inch frame relay rack, which is common in Central
Office locations. In this configuration, the 8112 server is held along the center of the chassis.
Office locations. In this configuration, the 8112 server is held along the center of the chassis.
The following procedure describes how to install the 8112 server in a 19 or 23-inch frame relay rack.
Step 1
Attach two mounting brackets to the front mounting holes of the server. See
•
For 19-inch racks, the long side of the bracket should be fastened to the server.
•
For 23-inch racks, the short side of the bracket should be fastened to the server.