Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
3-18
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 3 Installing the 8112 Server
Connecting the system cables
If your system requires two MA-16 Multi Access Blades, you need two breakout boxes. (A fully loaded
960 port E1 system has two MA-16s and a fully loaded 736 port T1 PRI system has two MA-16s).To
mount the second breakout box, follow the instructions above. Place the second breakout box directly
above the first breakout box. See
960 port E1 system has two MA-16s and a fully loaded 736 port T1 PRI system has two MA-16s).To
mount the second breakout box, follow the instructions above. Place the second breakout box directly
above the first breakout box. See
.
Figure 3-10 System with Two Breakout Boxes
Connecting the system cables
This section describes how to connect the system cables correctly.
Connecting the power cable
Warning
To meeting grounding requirements, you must connect the power cable before connecting any other
cables.
cables.
Step 1
Locate the Cisco Systems-supplied power cable.
Step 2
Attach the socket end of the Cisco Systems-supplied power cable to the AC inlet on the back of the
server. See
server. See
.