Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
3-43
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 3 Installing the 8112 Server
Installing and connecting the modem
Figure 3-31 CPU Transition Module
Step 8
Connect the other end of the telephone extension cable to its source. The source should be a standard
analog phone line, not an extension for a digital phone.
analog phone line, not an extension for a digital phone.
Step 9
Turn the modem power switch to the on position.
Installing the modem in T1 PRI and E1 systems
Follow these instructions to install the modem in T1 PRI and E1 systems.
Step 1
Verify the modem’s power switch is in the off position. The modem’s power switch is on the side of the
modem.
modem.
Step 2
Looking at the back of the modem, connect the modem power cable to the far left position on the back
of the modem.
of the modem.