Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
3-41
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 3 Installing the 8112 Server
Installing and connecting the modem
Figure 3-29 Modem Placement and Connections
Step 2
Verify the modem’s power switch is in the off position. The modem’s power switch is on the side of the
modem.
modem.
Step 3
Looking at the back of the server, connect the modem power cable to the far left position on the back of
the modem. See
the modem. See
Step 4
Connect the other end of the modem power cable into the power outlet.
Step 5
Looking at the back of the server, connect the telephone extension cable to the far right position on the
back of the modem, labeled “Line”. There are two RJ-11 connectors on the modem. This cable should
be placed in the far right connector. See
back of the modem, labeled “Line”. There are two RJ-11 connectors on the modem. This cable should
be placed in the far right connector. See
Step 6
Looking at the back of the server, connect the DB25 end (the larger connector) of the modem cable to
the back of the modem. See
the back of the modem. See
to see which end is the DB25 end. See
for the
placement of the modem cable into the modem.