Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
4-51
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8106)
78-16411-01
Chapter 4 Configuring the 8106 Server
Configuring the system
Step 1
If you do not already have terminal logging turned on, turn it on before proceeding. For information on
logging, see the
logging, see the
.
Step 2
At the tech$ prompt, type
e1span
.
appears.
Figure 4-56 e1span Command Menu
Step 3
Type
2
and press Enter to modify a span record.
appears.
Figure 4-57 span Command Record Selection
Step 4
Type the number of the span record that needs to be modified and press Enter. In this example, span
record 0 is being configured so type
record 0 is being configured so type
0
and press Enter. The first five lines of
appear.
Human assistance?
n
Specifies if human assistance is
allowed.
allowed.
•
y = yes
•
n = no
Flash transfer?
n
Specifies if this can be flash
transferred.
transferred.
•
y = yes
•
n = no
Outdial?
y
Specifies if this can be outdialed
on.
on.
•
y = yes
•
n = no
Table 4-9
Default E1 Span Configuration (continued)
Parameter
Default
Explanation
Possible Values
X
meetingplace:tech$ e1span
MeetingPlace is up
***** E 1 S P A N C O N F I G M E N U *****
1) View ACTI span record(s)
2) Modify ACTI span record
x) Exit program
Enter command:
Enter command: 2
Enter ACTI span record number [0..15] : 0