Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
4-73
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8106)
78-16411-01
Chapter 4 Configuring the 8106 Server
Configuring the system
Step 7
.
The display shows the new date and time as in the last line of
The month, day, hour, and minute values are all two digits, with a zero prefix for values less than 10. For
the year, you can either use all four digits of the year (for example, “1998”) or just the last two digits
(for example, “02” for the year 2002). The hour is in 24-hour format (00-23). You can append seconds
to any format by adding a period and two digits (for example “.34” means 34 seconds).
the year, you can either use all four digits of the year (for example, “1998”) or just the last two digits
(for example, “02” for the year 2002). The hour is in 24-hour format (00-23). You can append seconds
to any format by adding a period and two digits (for example “.34” means 34 seconds).
Step 8
Finalize the configuration by typing
restart
and pressing Enter. Refer to the first line in
.
(For more information about the “restart” command, see the
.)
Figure 4-80 restart Command
Step 9
Type
y
and press Enter to verify you want to restart the system. The third, fourth, and fifth lines in
appear.
Step 10
Wait five to ten minutes and verify the system has come up by entering
swstatus
and pressing Enter.
(For more information about the “swstatus” command, see the
.)
Once all of the software modules have a status of “UP”, as in
, move on to the next step.
meetingplace:tech$ restart
Are you sure (y/n)? y
Enabling system activation.
Checking to see if the system is loaded...
The System Integrity Manager is not running.