Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
7-5
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8106)
78-16411-01
Chapter 7 Installing a Shadow Server
Configuring the primary server
Step 2
Log in as technician. The tech$ prompt appears.
Step 3
If you do not already have terminal logging turned on, turn it on before proceeding. For information on
logging, see the
logging, see the
.
Step 4
At the tech$ prompt, type
net
and press Enter. The first six lines in
prompts you to enter a selection.
Figure 7-2
net Command Menu
Step 5
Type
3
appears prompting you
to enter a unit number.
Step 6
Type
9
to select unit 9 and press Enter. The last five lines in
appear.
Step 7
Type
2
and press Enter to modify the server configuration.
Step 8
If unit 9 is currently inactive (which it should be) you are asked if you want to make it active. Type
y
and
press Enter to make it active. See
.
Figure 7-3
Modifying Unit 9
Step 9
Select options
3
,
4
,
5
, and
6
consecutively and enter the appropriate data collected from
following the prompts.
If you do not want to change a specific value, simply press Enter and nothing is changed.
Step 10
If the shadow server is located at a different site, type
2
and press Enter to select a different site for the
shadow server.
meetingplace:csc$ net
1) View the server & site configuration
2) Modify the server configuration
3) Select another server (current unit = #0)
99) Quit
Select: 3
Unit: 9
1) View the server & site configuration
2) Modify the server configuration
3) Select another server (current unit = #9)
99) Quit
Select: 2
You have selected a new configuration for this unit.
Unit class = SHADOW
Site class = REMOTE
Update the initialization file (y/[n])? y
DONE
NOTE: Changes take effect with the next restart of the unit.
Unit class = SHADOW/REMOTE