Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
3-24
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8106)
78-16411-01
Chapter 3 Installing the 8106 Server
Connecting the system cables
To connect the IP LAN cables, follow these steps:
Step 1
Locate the IP LAN cables that are shipped in your package.
Step 2
Plug the first IP LAN cable into the customer-supplied RJ-48c socket.
Step 3
Plug the other end of the first IP LAN cable into the Ethernet 1 connector on the Multi Access Blade.
Step 4
Repeat steps 2 and 3 if you have more than one Multi Access Blade for the IP configuration.
illustrates the 8106 server’s connections from the back of the server. This configuration
supports 480 IP ports with one MA-16.
Figure 3-18 Back of Server (IP with 1 MA-16)
illustrates the 8106 server’s connections from the back of the server. This configuration
supports 120 IP ports with one MA-4.
Figure 3-19 Back of Server (IP with 1 MA-4
)
Connecting telephony cables for mixed systems
A mixed system is a 8106 server with both an IP configuration and either a T1 CAS, T1 PRI, or E1
configuration.
configuration.