Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual

4-26

Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8106)

78-16411-01

Chapter 4 Configuring the 8106 Server

Configuring the system

Figure 4-32 timezone Command Selection and Confirmation Screen

Step 5

Type

and press Enter to confirm your selection, or

and press Enter to abort your selection. The line

“DONE” and the tech$ prompt appear.

Configuring blades

This section describes how to configure blades. There are four types of blades:

•

T1 Smart Blade

•

Multi Access Blade (MA-16)

•

Multi Access Blade (MA-4)

•

Smart Blade

Refer to

Table 4-3

for an explanation of each.

Warning

Mixing protocols is not supported except in combination with IP ports. For example, a system cannot
have both T1 and E1 ports configured but it can have T1 (either PRI or CAS) and IP ports or E1 and IP
ports. Also, a system cannot have both T1 CAS and T1 PRI ports configured. Refer to

Table 4-4

Select: 7

The local time zone (PST) is 480 minutes west of GMT

Daylight savings time policy: US/Canada

Please confirm (y/n):

Table 4-3

Blade Types

Blade Type

Explanation

T1 Smart Blade

Provides both PRC and MSC functionality along with necessary
trunk interface functionality for digital T1 CAS telephone lines.

Multi Access Blade (MA-16 and
MA-4)

Provides the necessary trunk interface card functionality for E1
digital telephony, T1 PRI functionality, and IP-based telephony. The
Multi Access Blade supports both Euro ISDN and QSIG telephony
protocols, T1 PRI support for North America (United States and
Canada), and G.711 and G.729a audio encoding for IP.

•

MA-16: Supports up to 16 spans (up to 480 IP ports)

•

MA-4: Supports up to 4 spans (up to 120 IP ports)

Smart Blade

Provides both PRC and MSC functionality in a single card.