Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual
4-6 Managing
Cisco MeetingPlace Audio Server System Manager’s Guide
February 27, 2004
Card type
Whether this trunk is a digital T1, IP, or
unassigned.
unassigned.
T1, IP, or None (unassigned)
Signaling protocol
The signaling type used by this trunk.
Loop start, ground start, E&M wink
start, immediate start, DID/DDI, clear
channel, IP, protocol table, any E1
start, immediate start, DID/DDI, clear
channel, IP, protocol table, any E1
Protocol table
Contains the configuration information
for the type of signaling used.
for the type of signaling used.
All T1 PRI systems are shipped from
the factory with protocol table 2 set to
use the default setting of ATT PRI
protocol; protocol 3 to use Nortel PRI;
and table 4 to use Bell PRI.
the factory with protocol table 2 set to
use the default setting of ATT PRI
protocol; protocol 3 to use Nortel PRI;
and table 4 to use Bell PRI.
# of DID digits
expected
expected
Indicates the number of digits sent by
the PBX or network.
the PBX or network.
Your choice (0 or a number from 2 to 6;
1 is not valid)
1 is not valid)
Mtg. ID for direct
mtg. access
or Default digits
for system
mtg. access
or Default digits
for system
Indicates which meeting callers to this
port will attend when DID/DDI digits =
0 and the default access type =
“meeting.”
port will attend when DID/DDI digits =
0 and the default access type =
“meeting.”
Meeting ID or DID/DDI number of the
meeting in which you want callers to be
placed.
meeting in which you want callers to be
placed.
Default access
type
type
Which MeetingPlace access type is
applicable to all ports in the group in
the absence of dialed number
information.
applicable to all ports in the group in
the absence of dialed number
information.
DID Meeting, Profile, or Combined
Your choice depends on the level of
access you want users to have on these
ports.
access you want users to have on these
ports.
Language
The language in which prompts will
play.
play.
English (USA), English (UK),
Japanese, French-Canadian, French
(France), German, Portuguese (Brazil),
Spanish (Americas), or No Language
Japanese, French-Canadian, French
(France), German, Portuguese (Brazil),
Spanish (Americas), or No Language
When No Language, callers hear a
language prompt when they dial into
MeetingPlace.
language prompt when they dial into
MeetingPlace.
Human
assistance?
assistance?
When someone in a meeting needs help,
MeetingPlace uses another port to
connect that person (via a call transfer)
to a contact or attendant. The value in
this field determines whether the ports
in this group can be used for call
transfer during a meeting.
MeetingPlace uses another port to
connect that person (via a call transfer)
to a contact or attendant. The value in
this field determines whether the ports
in this group can be used for call
transfer during a meeting.
Yes or No
Choose Yes, assuming that an individual
who can provide assistance to users can
be reached on this port group.
who can provide assistance to users can
be reached on this port group.
Flash transfer?
Whether these ports initiate a call
transfer by using a hook flash.
transfer by using a hook flash.
Yes or No
Your telephony network provider can
provide this answer.
provide this answer.
Outdial?
Whether these ports can be used for
outgoing calls.
outgoing calls.
Yes or No
For most applications, you should set
ports to handle outdial.
ports to handle outdial.
Attribute
Description
Choices/Recommendations