Cisco Cisco TelePresence Management Suite (TMS) Version 15

Page of 254
Configuring Early Offer (and fallback to Delayed Offer) for SIP trunks
 1.  For each trunk, do one of the following depending on your Unified CM version:
 
l
For Unified CM Version 9.1(2) systems, enable the Early Offer support for voice and video calls 
(insert MTP if needed).
 
l
For Unified CM Version 10.5(2) systems, in the Early Offer support for voice and video calls 
dropdown, select Best Effort (no MTP inserted).
 2.  Remove all MTP resources from the following elements:
 a.  SME clusters (in the case of Unified CM SME deployments). 
 b.  All TelePresence endpoints and SIP trunks on all Unified CM clusters.
 3.  Set SIP Trunk DTMF Signaling Method to RFC 2833 (the default).
 4.  Enable the Accept Audio Codec Preference in Received Offer option on the following elements:
 a.  All SME SIP trunks (in the case of Unified CM SME deployments). 
 b.  All SIP trunks that carry TelePresence calls on all Unified CM clusters.
Fallback to Delayed Offer
For outgoing calls, the default settings provide for automatic fallback to Delayed Offer in cases where no 
MTP resource exists. Without fallback, issues may arise in non-Optimized Conferencing areas of the 
network. For incoming calls, Early Offer is supported with no requirement for MTP resources.
Endpoints
Any TelePresence endpoints registered to Unified CM should be configured with a Media Resource Group 
List (MRGL) that does not contain any MTP resources. So that when the endpoints place a call that traverses 
one of the above trunk types an MTP will not be available within the MRGL of the endpoint.
Configuring a Routing Rule for  Bridges Trunked to Unified 
CM
For Unified CM-centric deployments, it is required to set up a routing rule for any MCU or TelePresence 
Server trunked to Unified CM.
If your MCU or TelePresence Server is trunked to Unified CM, it will dial a long string of characters at your 
CMR Hybrid site (example: yoursite.webex.com)
To ensure calls are routed correctly, set up a SIP routing pattern  in Unified CM for your site  to route to the 
SIP trunk for Expressway-C. For details, refer to the Unified CM documentation. 
Cisco Collaboration Meeting Rooms (CMR) Hybrid Configuration Guide (TMS 14.6 - WebEx WBS29.11)     
Page 103 of 254
Configuring Call Control
Configuring Cisco Unified Communications Manager