Cisco Cisco TelePresence Management Suite (TMS) Version 15
Configuration Task Checklist
This topic summarizes the solution configuration process to deploy CMR Hybrid.
Task 1: Install/Upgrade Required Product Versions
Install/upgrade the required version of each product for CMR Hybrid. Follow the sequence specified in
.
NOTE: If you are migrating from a previous deployment of CMR Hybrid or WebEx Enabled TelePresence,
Task 2: Check Solution Prerequisites are Complete
Make sure the following items are in place before you do a first-time deployment or upgrade your previous
CMR Hybrid deployment:
n
TelePresence Server bridges must be configured for remote management by the TelePresence
Conductor.
n
Endpoints must be registered to Unified CM or to Cisco VCS as appropriate.
n
All devices must be running the required software and firmware versions.
Task 3: Check Solution Release Notes
Check the release-specific configuration considerations described in the latest solution release notes for
Task 4: Configure the TelePresence Conductor
n
n
Task 5: Add Normalization Scripts to Unified CM (Unified CM-Centric
Deployments)
Deployments)
Skip this step for Cisco VCS-Centric deployments, unless a Unified CM exists in the enterprise. Unified CM-
centric deployments that use encryption and TLS on SIP trunks for TelePresence must install the latest
Verify that the system is working as expected before you continue to the next step.
Cisco Collaboration Meeting Rooms (CMR) Hybrid Configuration Guide (TMS 14.6 - WebEx WBS29.11)
Page 59 of 254
Configuration Checklist
Configuration Task Checklist