Cisco Cisco TelePresence Management Suite (TMS) Version 15
Connecting TelePresence Conductor to Cisco
VCS
VCS
Before You Start
n
.
n
Cisco TelePresence Video Communication Server must be installed and configured to act as a SIP
registrar and proxy.
n
One or more conference bridges must be powered on and accessible to the Cisco TelePresence
Conductor over HTTP/HTTPS and SIP TLS.
Process
To configure the TelePresence Conductor for CMR Hybrid in Cisco VCS-Centric deployments, follow the
.
n
The VCS Zone profile for the trunk between Cisco VCS Control and TelePresence Conductor should be
set to Custom with Automatically respond to SIP searches set to On. For details, see Adding the
TelePresence Conductor as a neighbor zone in Cisco TelePresence Conductor with Cisco TelePresence
VCS (B2BUA) Deployment Guide XC3.0.
These instructions walk you through:
n
Designing a dial plan.
n
Configuring the Cisco TelePresence MCU Series.
n
Configuring the TelePresence Server.
n
Configuring Cisco VCS with a neighbor zone and search rule for TelePresence Conductor.
n
Configuring the TelePresence Conductor in B2BUA mode (deployments using the Cisco VCS external
policy service are not supported)
Cisco Collaboration Meeting Rooms (CMR) Hybrid Configuration Guide (TMS 14.6 - WebEx WBS29.11)
Page 73 of 254
Connecting Cisco TelePresence Conductor to Call Control
Connecting TelePresence Conductor to Cisco VCS