Cisco Cisco TelePresence Management Suite (TMS) Version 15
Required Settings for TelePresence Server
The following setting in TelePresence Server is required for CMR Hybrid:
n
n
For more information about TelePresence Server software, refer to the following link:
SIP
TelePresence Server calls to WebEx support SIP only. Make sure SIP is configured correctly on
TelePresence Server.
Note: Refer to the TelePresence Server help for more information on how to configure SIP.
Automatic Content Handover
This feature must be enabled for TelePresence endpoints to share during a CMR Hybrid meeting.
Note: This applies to hardware-based TelePresence Servers only. For TelePresence Server on Virtual
Machine in remotely-managed mode, it is enabled automatically through the Conductor API.
To enable Automatic Content Handover in TelePresence Server, do the following:
1. Log into the TelePresence Server.
2. Go to Configuration > System Settings.
3. The System Settings page appears.
4. Make sure Automatic content handover is checked.
5. At the bottom of the page, click Apply changes.
Cisco Collaboration Meeting Rooms (CMR) Hybrid Configuration Guide (TMS 14.6 - WebEx WBS29.11)
Page 92 of 254
Configuring Cisco MCU and TelePresence Server
Required Settings for TelePresence Server