Cisco Cisco TelePresence Management Suite (TMS) Version 15 Installation Guide
Set up a cluster name
When using FindMe, you must set up the Cisco VCS with a cluster name regardless of whether it is part of a
cluster.
cluster.
To set up or change the cluster name:
1. Go to
VCS configuration > Clustering
.
2. Enter the Cluster name:
l
If the Cisco VCS is part of a cluster, set it to the fully qualified domain name used in SRV records that
address the cluster, for example "cluster1.example.com".
address the cluster, for example "cluster1.example.com".
l
If the Cisco VCS is not part of a cluster, set it to the fully qualified domain name used in SRV records
that address the Cisco VCS, for example "vcs1.example.com".
that address the Cisco VCS, for example "vcs1.example.com".
3. Click Save.
Enable and configure FindMe settings
To enable and configure FindMe on the Cisco VCS:
1. Go to the
FindMe configuration
page (
Applications > FindMe > Configuration
).
2. Set FindMe mode to On.
3. We recommend that you set Caller ID to FindMe ID. The options are:
l
FindMe ID: the caller ID of a call being made through this Cisco VCS is replaced with the relevant
FindMe ID.
FindMe ID.
l
Incoming ID: the caller ID is not altered; the caller ID presented to the called endpoint will be the ID of
the endpoint initiating the call.
the endpoint initiating the call.
4. Click Save.
Sending and returning calls via ISDN gateways
This section describes how to use FindMe with calls that are routed via an ISDN gateway (for example, when
calling a mobile phone, or some other ISDN accessible destination).
calling a mobile phone, or some other ISDN accessible destination).
If the Cisco VCS has Caller ID (
Applications > FindMe > Configuration
) set to use the FindMe ID, the
caller ID presented will be the user's E.164 phone number. The E.164 phone number would either have been
entered manually when the user account was configured, or supplied by AD (from the Office Phone number)
if Cisco TMS created the account for AD provisioned users.
entered manually when the user account was configured, or supplied by AD (from the Office Phone number)
if Cisco TMS created the account for AD provisioned users.
Cisco TMSPE Provisioning Deployment Guide
Page 55 of 78
Deploying FindMe