Cisco Cisco TelePresence Management Suite (TMS) Version 15
Verifying device authentication
The Cisco VCS's Provisioning Server requires that any provisioning or phone book requests it receives have
already been authenticated at the zone or subzone point of entry into the Cisco VCS. The Provisioning
Server does not do its own authentication challenge and will reject any unauthenticated messages.
already been authenticated at the zone or subzone point of entry into the Cisco VCS. The Provisioning
Server does not do its own authentication challenge and will reject any unauthenticated messages.
Verify that each of the zones and subzones listed below are configured with an Authentication policy of
either Check credentials or Treat as authenticated.
either Check credentials or Treat as authenticated.
n
The Default Zone. To verify:
l
If using Cisco VCS X7.1, go to
VCS configuration > Zones
and select the Default Zone.
l
If using Cisco VCS X7.2, go to
VCS configuration > Zones > Zones
and select the Default Zone.
n
Any traversal client zones:
l
If using Cisco VCS X7.1, go to
VCS configuration > Zones
, then select each zone of type Traversal
client.
l
If using Cisco VCS X7.2, go to
VCS configuration > Zones > Zones
, then select each zone of type
Traversal client.
n
The Default Subzone. These settings are found at
VCS configuration > Local Zone > Default
Subzone
.
n
Any other configured subzones. Go to
VCS configuration > Local Zone > Subzones
, then select each
subzone to verify their configurations.
Cisco TMSPE Provisioning Deployment Guide
Page 17 of 78
Configuring Cisco VCS for provisioning
Verifying device authentication