Cisco Cisco TelePresence Management Suite (TMS) Version 15
1. Open the Windows Services panel and locate TMS Provisioning Extension.
2. Right-click TMS Provisioning Extension and select Properties.
3. In the Startup type drop-down, select Automatic.
4. Click OK.
A coming release of Cisco TMSPE will use the Automatic startup type and eliminate the need for this
procedure.
procedure.
Enabling Cisco TMSPE
After completing the installation:
1. In Cisco TMS, go to
Administrative Tools > Configurations > General Settings
, set the field
Provisioning Mode to Provisioning Extension and click Save. You may need to refresh the browser
window or empty the browser cache after making this selection.
window or empty the browser cache after making this selection.
2. Go to
Administrative Tools > Activity Status
to verify that the switch is completed.
3. Verify that Cisco TMSPE features are now available and functioning.
a. Browse to the following pages in Cisco TMS:
o
Systems > Provisioning > Users
. If this page reports a problem connecting to User Repository,
o
Systems > Provisioning > FindMe
o
Systems > Provisioning > Devices
o
Administrative Tools > Configuration > Provisioning Extension Settings
b. Go to
Administrative Tools > Provisioning Extension Diagnostics
, look for any alarms raised and
click Run Health Check. If any alarms are raised, click them to see details and perform the corrective
actions described. See
actions described. See
for further information.
4. When browsing to all of the above Cisco TMSPE pages is successful and no alarms are reported in
Provisioning Extension Diagnostics
Cisco TMSPE Provisioning Deployment Guide
Page 19 of 78
Installing Cisco TMSPE
Enabling Cisco TMSPE