Cisco Cisco TelePresence Management Suite (TMS) Version 15
Connecting to TelePresence Conductor
You can add a maximum of 30 TelePresence Conductor connections to Cisco TMSPE.
Connect only to one TelePresence Conductor from a cluster.
On each TelePresence Conductor to be connected with Cisco TMSPE:
1.
Go to Users > Administrator accounts.
2.
Click New.
3.
Add a new user exclusively for Collaboration Meeting Rooms, with the following settings:
—
Access level: Read-write
—
Web access: No
—
API access: Yes
—
State: Enabled
4.
Click Save.
In Cisco TMS:
1.
Go to Systems > Provisioning > Users.
2.
Under Collaboration Meeting Room Templates, click TelePresence Conductor Settings.
The TelePresence Conductor Settings dialog appears.
The TelePresence Conductor Settings dialog appears.
3.
Click Add New.
The TelePresence Conductor Configuration dialog box appears.
4.
Fill in the credentials you created for TelePresence Conductor.
Field
Description
Hostname/IP The hostname or IP address of the TelePresence Conductor you want to connect to.
Port
The port to connect on. By default, the connection uses HTTPS on port 443.
Username
The credentials for a TelePresence Conductor administrator account with the following
settings and permissions:
settings and permissions:
—
Access level: Read-write
—
Web access: No
—
API access: Yes
—
State: Enabled
Password
Domain
The domain that this TelePresence Conductor will append for all numeric aliases created
through Cisco TMSPE.
through Cisco TMSPE.
5.
Click Connect.
—
If connection is successful, you will be returned to the Manage Conductors dialog, where the newly added
TelePresence Conductor is visible in the list. Click the X to close, unless you need to add another
TelePresence Conductor.
TelePresence Conductor is visible in the list. Click the X to close, unless you need to add another
TelePresence Conductor.
—
If there is a problem with the connection, you will be returned to the Conductor Configuration dialog so
that you can make any necessary adjustments to the settings.
that you can make any necessary adjustments to the settings.
Creating Templates
Settings for Collaboration Meeting Room must be configured on a per-group level. The settings are configured by
assigning templates to groups.
assigning templates to groups.
To create a template:
35
Cisco TelePresence Management Suite Provisioning Extension with Cisco Unified CM Deployment Guide