Cisco Cisco TelePresence Management Suite (TMS) Version 15
1.
In Cisco TMS, go to Systems > Provisioning > FindMe.
2.
In the Accounts and Groups container, navigate to the group into which you want to add an account.
3.
Above the explorer view, click Add Account.
The Add Account dialog box is displayed.
4.
Configure the fields as follows:
Display Name
Display name for the account.
Username
Username for the account.
FindMe Address
The FindMe ID for the account.
Caller ID
Callback number that is used when a FindMe call is routed through an ISDN
gateway
gateway
Account Type
Select Individual or Group.
Setting up FindMe Locations and Devices
You create FindMe location and device templates if you want to provide FindMe users with locations and devices when
they access the FindMe User Portal. The information you provide is passed on to and used by the configured VCSs.
they access the FindMe User Portal. The information you provide is passed on to and used by the configured VCSs.
To set up FindMe locations and devices, complete the following tasks:
1.
2.
3.
4.
5.
Suggested Minimum Setup
For a minimum FindMe setup we recommend taking the following approach:
1.
Enable FindMe with the Provisioned Devices field set to
Set as default device for user's active location. This
option results in a device being added to the FindMe portal of the associated account when the user logs in and
the device is provisioned. The device is also set as an initial device to ring at the active location. See
the device is provisioned. The device is also set as an initial device to ring at the active location. See
2.
Define one location template, for example, named
Office
, and accept the default ring duration of 5 seconds. See
3.
Assign the location template to the top-level group in the group hierarchy. See
Adding FindMe Device Templates
Add device templates for each type of endpoint through which FindMe users can be contacted.
To add FindMe device templates:
1.
In Cisco TMS, go to System > Provisioning > FindMe, and then click the Device Templates container. If one or
more device templates have already been added, they are displayed in the explorer view. If no templates exist,
you will see this:
more device templates have already been added, they are displayed in the explorer view. If no templates exist,
you will see this:
71
Cisco TelePresence Management Suite Provisioning Extension with Cisco VCS Deployment Guide