Cisco Cisco TelePresence Management Suite (TMS) Version 15
2.
Go to
Administrative Tools > Activity Status
to verify that the switch is completed.
3.
Verify that Cisco TMSPE features are now available and functioning.
a.
Browse to the following pages in Cisco TMS:
•
Systems > Provisioning > Users
. If this page reports a problem connecting to User Repository, the
database connection is not working. See
•
Systems > Provisioning > Devices
•
Systems > Provisioning > FindMe
Note that
Systems > Provisioning > FindMe
will be displayed with an error message if when/if FindMe
has been enabled.
•
Administrative Tools > Configuration > Provisioning Extension Settings
b.
Go to
Administrative Tools > Provisioning Extension Diagnostics
, look for any alarms raised and click Run
Health Check. If any alarms are raised, click them to see details and perform the corrective actions
described. See
described. See
4.
When browsing to all of the above Cisco TMSPE pages is successful and no alarms are reported in
Provisioning
Extension Diagnostics
, proceed to
.
Setting up Communication Between Cisco TMS and Cisco VCS
Perform this procedure to enable the Cisco VCS or VCS clusters to communicate with Cisco TMSPE. If Cisco VCSs are
clustered, configure only one Cisco VCS in the cluster.
clustered, configure only one Cisco VCS in the cluster.
■
Cisco VCS imports the user configurations, FindMe settings, phone books and licensing information from Cisco
TMSPE.
TMSPE.
■
Cisco TMSPE receives information about provisioned devices from Cisco VCS.
Follow these steps:
1.
In Cisco TMS, go to
Systems > Navigator
and select the Cisco VCS. This can be any Cisco VCS from the cluster.
2.
Click the Provisioning tab.
23
Cisco TelePresence Management Suite Provisioning Extension with Cisco VCS Deployment Guide