Cisco Cisco TelePresence Management Suite (TMS) Version 15
3.
Configure the fields as follows:
Display
Name
Name
The FindMe device name; for example,
E20
.
Device
Type
Type
The picture to display. Select from the following:
—
Video Endpoint
—
Telephone
—
Mobile Phone
—
Laptop
—
Person
—
Voice Mail.
You must select this device type for voicemail systems to ensure that the message is recorded
in the correct voicebox. The setting will make the diversion header include information about
the original called party.
in the correct voicebox. The setting will make the diversion header include information about
the original called party.
—
Video Mail
—
Group
Device
Address
Pattern
Address
Pattern
The pattern to use to create the device address or number; for example,
{username}.e20@example.com
.
4.
Click Save.
Adding FindMe location templates
The endpoint devices available to FindMe users may vary depending on their current location. You can add location
templates to represent these variations.
templates to represent these variations.
For example, use location templates to represent different physical locations such as "home" or "office", as well as
different circumstances such as "on vacation" or "in a meeting".
different circumstances such as "on vacation" or "in a meeting".
To add FindMe location templates:
1.
In Cisco TMS, go to
System > Provisioning > FindMe
, and then click the Location Templates container. If one or
more location templates have already been added, they are displayed in the explorer view. If no templates exist,
you will see this:
you will see this:
67
Cisco TelePresence Management Suite Provisioning Extension with Cisco VCS Deployment Guide