Cisco Cisco TelePresence Management Suite (TMS) Version 15
2.
Above the explorer view, click Add Location Template. The Add Location Template dialog box is displayed.
3.
Configure the fields as follows:
Display
Name
Name
The FindMe location name; for example,
Office
, Home Office or On the Road. This appears as a
FindMe location when users configure their FindMe.
Ring
Duration
Duration
This setting defines how long (in seconds) to let the devices in the current location ring before the
call is forwarded to an alternative destination (busy or no answer – if configured), or is cleared.
call is forwarded to an alternative destination (busy or no answer – if configured), or is cleared.
4.
Click Save.
Associating Device Templates with Location Templates
For each location template you add, you must designate at least one device that should be dialed by default whenever a
user's FindMe address is contacted.
user's FindMe address is contacted.
You can also specify which devices to dial:
■
If the designated default devices are busy.
■
If a call is not answered within the location's configured ring duration.
To associate devices to a location:
1.
In Cisco TMS, go to
System > Provisioning > FindMe
, click the Location Templates container, and then in the
explorer view, click the location template to which you want to assign a device template.
68
Cisco TelePresence Management Suite Provisioning Extension with Cisco VCS Deployment Guide