Cisco Cisco TelePresence Management Suite (TMS) Version 15 Installation Guide
Requirements and prerequisites
Cisco TelePresence Management Suite Installation and Getting Started Guide (13.2)
Page 12 of 77
Ports used by Cisco TMS
The following ports are used by Cisco TMS and must be enabled in the Windows firewall. Not all services will
be used in all installations depending on the configuration and the devices used.
be used in all installations depending on the configuration and the devices used.
Service
Protocol
Port
Direction (relative to Cisco TMS)
In
Out
HTTP
TCP
80
X
X
HTTPS
TCP
443
X
X
Telnet
TCP
23
X
Telnet Challenge
TCP
57;
X
Telnet Polycom
TCP
24
X
X
FTP
TCP
20, 21
X
SNMP
UDP
161
X
X
SNMP Traps
UDP
162
X
X
SMTP
TCP
25
X
LDAP
TCP
389
X
X
LDAPS
TCP
636
X
X
TMS-Agent
TCP
8989
X
X
Cisco Unified CM
TCP
8043
X
Cisco TelePresence System (CTS)
TCP
80, 23, 8081
X
X
Polycom GAB
TCP
3601
X
X
Polycom MGC (for version 6 and lower)
TCP
5001
X
X
TMS Agent Admin
TCP
4444
X
X
Note: Cisco TMS cannot use multiple network cards on a server and will only bind to the first available
network interface. Cisco TMS can manage a public and private network as long as the public network’s
connection is further upstream from Cisco TMS, rather than being directly connected to Cisco TMS (using
multiple network interface cards).
network interface. Cisco TMS can manage a public and private network as long as the public network’s
connection is further upstream from Cisco TMS, rather than being directly connected to Cisco TMS (using
multiple network interface cards).