Cisco Cisco TelePresence Management Suite (TMS) Version 15 Installation Guide
■
Mail server access: Cisco TMS requires access to an SMTP server to be able to send email. Your company's
existing mail servers can be used for this. Note that Cisco TMS supports SMTP AUTH login for authentication if
required.
existing mail servers can be used for this. Note that Cisco TMS supports SMTP AUTH login for authentication if
required.
■
Network access to managed devices:Cisco TMS needs specific protocols and access to manage devices. Any
network firewalls or NAT routers must allow traffic to flow to and from Cisco TMS.
network firewalls or NAT routers must allow traffic to flow to and from Cisco TMS.
■
Microsoft IIS components ASP.NET and ASP must be enabled.
■
Windows Firewall is enabled by default and controls both inbound and outbound ports. For information on which
ports must be opened when Windows Firewall is enabled, see
ports must be opened when Windows Firewall is enabled, see
.
■
Make sure anti-virus programs or other security measures are not blocking applications from sending mail
directly using the SMTP port.
directly using the SMTP port.
Ports Used by Cisco TMS
The following ports are used by Cisco TMS and must be enabled in the Windows firewall. Not all services will be used in
all installations, depending on the configuration and the devices used.
all installations, depending on the configuration and the devices used.
Service or system
Transport protocol
Port
Direction (relative to Cisco TMS)
In
Out
FTP
TCP
20, 21
X
HTTP
TCP
80
X
X
HTTP for Cisco TelePresence System (CTS)
TCP
8081
X
HTTPS
TCP
443
X
X
HTTPS for Cisco TelePresence System (CTS)
TCP
9501
X
HTTPS for Unified CM
TCP
8443
X
LDAP
TCP
389
X
LDAPS
TCP
636
X
Polycom GAB
TCP
3601
X
SMTP
TCP
25
X
SNMP
UDP
161
X
SNMP Traps
UDP
162
X
X
SSH
TCP
22
X
Telnet
TCP
23
X
Telnet Challenge
TCP
57
X
Telnet Polycom
TCP
24
X
For SQL connections, the TCP port used by a default SQL server instance is configurable, and the port used by a named
SQL server instance is dynamic, changing whenever the service restarts. For instructions on making your SQL server
listen to a particular port, see the TechNet article
SQL server instance is dynamic, changing whenever the service restarts. For instructions on making your SQL server
listen to a particular port, see the TechNet article
11
Cisco TelePresence Management Suite Installation and Upgrade Guide
Prerequisites