Cisco Cisco TelePresence Management Suite (TMS) Version 15 Installation Guide
Configuring the IP Address setting
You must set the IP address using the LCD panel:
1. Power up the server and wait for it to finish booting. The LCD panel should show the server’s current IP
after the server has finished starting up.
2. Press Enter to display the Main Menu.
3. Use the Up or Down arrow to select IP Settings.
4. Press Enter to confirm your selection.
5. Use the Up or Down arrow to select IP Address and press Enter twice to enter edit mode.
6. Moving between characters using the Up and Down arrows, edit the values by pressing Enter and using
the Up or Down arrow to modify the value. Press Enter again to confirm the value, or press Return to
restore the previous value.
restore the previous value.
7. When you have finished editing the address, press Return. At the
Save Changes?
prompt, use the Up or
Down arrow to select Yes and press Enter.
8. Press Return to go back to the IP Settings menu.
9. Use the Up or Down arrow to select Subnet Mask and press Enter twice.
10. Repeat steps 5-6 to enter the Subnet Mask address.
11. Press Return to go back to the IP Settings menu.
12. Use the Up or Down arrow to select Default Gateway and press Enter twice.
13. Repeat steps 5-6 to enter the Default Gateway address.
Configuring the server operating system
To complete the physical installation of the server, several basic server operating system settings must be
configured using the web interface for Microsoft Server. The following steps must be completed from another
computer on the network that has Internet Explorer (ActiveX required) installed and network access to the
Cisco TelePresence Management Server.
configured using the web interface for Microsoft Server. The following steps must be completed from another
computer on the network that has Internet Explorer (ActiveX required) installed and network access to the
Cisco TelePresence Management Server.
1. In the web browser URL field enter https://<ManagementServerIPAddress>:8098 where
<ManagementServerIPAddress> is the IP address of the Cisco TelePresence Management Server that
you configured previously.
you configured previously.
2. If you see a security warning stating "There is a problem with this web site's security certificate" – this is
normal because your browser does not trust the default server certificate that is pre-installed. Click
Continue to this website.
Continue to this website.
3. When prompted, enter the username Administrator and password TANDBERG.
Cisco TelePresence Management Suite Installation and Upgrade Guide (14.3.1)
Page 31 of 50
Setting up Cisco TelePresence Management Server