Cisco Cisco TelePresence Management Suite (TMS) Version 15 Installation Guide
4. Insert Cisco TelePresence Management Server into a 19” rack, and secure it at the front using four
screws.
Connecting the cables
LAN cable
Connect a LAN cable from the "LAN 1" connector on Cisco TelePresence Management Server to your
network. The LAN 2, 3 and 4 connectors are not used and should be left open.
network. The LAN 2, 3 and 4 connectors are not used and should be left open.
Power cable
Connect the system power cable to an electrical distribution socket. Press the power switch button at the
back to 1. The power indicator LED, marked Pwr, on the front panel lights up.
back to 1. The power indicator LED, marked Pwr, on the front panel lights up.
Configuring the server
Using the LCD panel
You must use the LCD panel for initial network configuration. If direct access to the server is subsequently
required, you can connect a VGA monitor, USB keyboard and mouse to access the server console.
required, you can connect a VGA monitor, USB keyboard and mouse to access the server console.
Up and Down
arrows
arrows
Used to select items in the menu, move between values in a numerical address and
modify numerical values.
modify numerical values.
Enter
Used to enter edit mode and confirm a selection or entry.
Return
Used to return to the previous menu or exit edit mode without saving the latest entry.
Cisco TelePresence Management Suite Installation and Upgrade Guide (14.3)
Page 29 of 44
Setting up Cisco TelePresence Management Server