Cisco Cisco TelePresence Management Suite (TMS) Version 15 Maintenance Manual
1.
Click on the Company Name folder in the tree.
The right panel will update to show the contents of that folder.
The right panel will update to show the contents of that folder.
2.
Click Edit This Folder in upper right corner of the screen.
3.
Rename the folder using the appropriate company name.
4.
Click Save.
5.
Add any additional folders:
a.
Click on the desired parent folder.
b.
Click New Folder on the right-hand side of the screen.
c.
Enter a name and, optionally, a description.
d.
Click Save.
e.
Repeat the above steps for as many folders as you wish to create.
You can add and delete folders at any time.
The root folder may not be deleted.
Adding Systems
The procedures described below are appropriate for most systems and system types.
Some systems require special procedures, see the following for further details:
■
■
■
■
For details of the layout and options of each of the Cisco TMS pages used in these procedures, see the reference
section
section
Prerequisites for all Systems
■
An administrator username and password for the system must be available for use by Cisco TMS.
For most endpoints, this will be the default admin account.
For most endpoints, this will be the default admin account.
■
Network Services for HTTP and/or HTTPS must be enabled on the system.
■
Endpoints that have a provisioning mode must be set to TMS.
■
If your system relies on SNMP-based autodiscovery, its NetworkServices SNMP CommunityName must be
set to a value listed in the Cisco TMS list of SNMP community names (see Administrative Tools >
Configuration > Network Settings > General Network Settings).
set to a value listed in the Cisco TMS list of SNMP community names (see Administrative Tools >
Configuration > Network Settings > General Network Settings).
Note that SNMP for purposes beyond system discovery is only used for legacy systems.
Enforcing Settings from Cisco TMS
We strongly recommend enabling Enforce Management Settings on Systems in Administrative Tools >
Configuration > Network Settings > General Network Settings > TMS Services before starting to add systems.
Configuration > Network Settings > General Network Settings > TMS Services before starting to add systems.
If you opt not to follow this recommendation, you must go to the system's Settings > Edit Settings tab in Navigator
once the system has been added and click Enforce Management Settings, repeating this on-demand enforcement
whenever settings change or need to be reset from Cisco TMS.
once the system has been added and click Enforce Management Settings, repeating this on-demand enforcement
whenever settings change or need to be reset from Cisco TMS.
Note that if you add one or more systems to a second Cisco TMS instance in a test environment, you must only leave
Enforce Management Settings on Systems in one Cisco TMS instance to avoid conflict.
Enforce Management Settings on Systems in one Cisco TMS instance to avoid conflict.
48
Cisco TelePresence Management Suite Administrator Guide
Adding and Managing Systems