Cisco Cisco TelePresence Management Suite (TMS) Version 15 Maintenance Manual
Participant Iden
tifier
tifier
■
Auto: Let the System Name of a participant to be displayed the number of seconds set in
Participant Identifier Timeout.
Participant Identifier Timeout.
■
On: Enable the System Name for each participant to be displayed in the picture during the
conference.
conference.
■
Off: Set to
Off
to disable the System Name to be displayed.
Lecture Mode
■
On: Set to
On
to enable the Lecturer to be displayed in full screen to the other
participants. The Lecturer is the participant which is assigned floor. The Lecturer will see
a scan of all the participants in a full screen view or one of the supported sub-picture
views. To enable the scan of other sites the CP Autoswitching must be set.
a scan of all the participants in a full screen view or one of the supported sub-picture
views. To enable the scan of other sites the CP Autoswitching must be set.
■
Off: Set to
Off
to disable the Lecturer, the participant which is assigned floor, to be view
in full screen.
FUR Block Sites
■
FURBlock (Fast Update Request Block) if one or more sites are experiencing network
errors.
errors.
■
Auto: FUR's from sites that send too many will be blocked.
■
On: FUR's from all sites will be blocked.
Protect
■
On: Only predefined Protected Numbers are allowed to join this conference. The
Protected Numbers
field will be shown, and numbers can be configured from the Dial-in
Configuration in the
MCU Conference Overview
.
■
Off: Protect mode disabled.
Encoder Selec
tion Policy
tion Policy
■
Best Bit Rate: Make the MPS prioritize the video quality for sites based on bit rate. The
system will move participants with a Low Video Rate to a secondary encoder, if it is
available. If no sites are moved, the system will move sites with Low Video Standard.
system will move participants with a Low Video Rate to a secondary encoder, if it is
available. If no sites are moved, the system will move sites with Low Video Standard.
■
Best Video Standard: Make the MPS prioritize sites based on video standard. The system
will move participants with a Low Video Standard to a secondary encoder, if it is
available. If no sites are moved, the system will move sites with Low Video Rate.
will move participants with a Low Video Standard to a secondary encoder, if it is
available. If no sites are moved, the system will move sites with Low Video Rate.
■
Best Resolution: Make the MPS prioritize the video quality for sites based on resolution.
The system will move participants with a Low Resolution to a secondary encoder, if it is
available. If no sites are moved, the system will move sites with low video rate.
The system will move participants with a Low Resolution to a secondary encoder, if it is
available. If no sites are moved, the system will move sites with low video rate.
Cisco TelePresence Conductor Settings
In Cisco TMS:
Booking > New Conference
Field
Description
Alias
Select the alias you want to use as your conference dial-in address.
The aliases displayed in the drop-down have been configured in
Systems > Navigator >
select a
TelePresence Conductor
> TelePresence Conductor
tab
> Aliases
.
Table 104 Alias configuration settings
157
Cisco TelePresence Management Suite Administrator Guide
Booking