Cisco Cisco TelePresence Management Suite (TMS) Version 15 Maintenance Manual
5.
Go to the
Select Advanced Settings
tab to add specific settings for certain systems by adding a filter, or leave
the filter field empty to get a complete list of setting per system/system type.
a.
Choose the type of system and/or type a part of the setting you are looking for.
b.
Click Search.
c.
From the resulting list, select settings you want to add for the system type using the check boxes.
d.
Click > to move them to the list of selected settings.
e.
Click Save.
Any setting selected in the
Select Advanced Settings
tab will now also be available in the
Template
Settings
tab, to be used in the configuration template.
Viewing a Configuration Template
Click the action drop-down View for a configuration template to display the settings that will be set on the selected
systems.
systems.
Editing a Template
This procedure uses the auto-created Discovered Systems Template as an example:
1.
Open
Systems > Configuration Templates
.
2.
Click on Discovered Systems Template.
The Type for the settings in this template is Other type because they are Cisco TMS configuration settings, not
configuration options from the device's commands itself.
configuration options from the device's commands itself.
3.
Use the drop-down action button and click Edit to see the
Edit Settings
page.
All templates have some common Cisco TMS settings added to them to start with, such as Zones and Phone
books.
books.
4.
To add more settings to the template, click on the
Select Advanced Settings
tab.
To see a list of all available settings, simply leave the Filter box blank and the drop down set to All Systems and
click Search. From this view, you can chose from all the template settings available in Cisco TMS and add them
to the list to be shown on the
click Search. From this view, you can chose from all the template settings available in Cisco TMS and add them
to the list to be shown on the
Template Settings
tab.
5.
Add or remove settings to the template by marking a setting's check box and using the arrow buttons to add or
remove it from the list on the right.
remove it from the list on the right.
6.
Once the desired changes have been made, click on the
Template Settings
tab to return to the previous view.
7.
On the
Template Settings
tab, enable or disable individual settings with their check boxes and set the values to
use for each setting.
8.
When finished, click Save.
Applying Templates to Systems
A template can be applied to one or many systems at once, but any one system can only have a single template
applied to it at a time.
applied to it at a time.
To apply a template to one or more systems:
1.
Go to
Systems > Configuration Templates
.
2.
Click the action drop-down button and select Set on Systems.
19
Cisco TelePresence Management Suite Administrator Guide
Setting up Cisco TMS