Cisco Cisco TelePresence Management Suite (TMS) Version 15 Maintenance Manual
3.
Fill in the fields described in the table below.
Sections and fields
Description
IP Zone
Name
Set a name for the IP zone.
Gateway Resource
Pool
Pool
ISDN Zone
Specify which ISDN zone you want the below gateway prefixes to use. Note that the
Gateway Resource Pool will not work correctly unless this setting has been
specified.
Gateway Resource Pool will not work correctly unless this setting has been
specified.
URI Domain Name
Cisco TMS will always use URI dialing between two locations where this setting is
filled in, thereby ignoring the IP/ISDN preferences defined at the bottom of this page.
filled in, thereby ignoring the IP/ISDN preferences defined at the bottom of this page.
Gateway Auto
Prefix
Prefix
The prefix needed to dial a video ISDN number from this IP zone using a Gateway.
Gateway Telephone
Prefix
Prefix
The prefix needed to dial an audio ISDN number from this IP zone using a Gateway.
Gateway 3G Prefix
The prefix needed to dial a 3G mobile phone number from this IP zone using a
Gateway.
Gateway.
Dial-in ISDN
Number
Number
These numbers are used for generating TCS-4 numbers like +15551231234*99999
when Cisco TMS is routing a call:
when Cisco TMS is routing a call:
—
from PSTN and into an IP zone.
—
from a 3G network and into an IP zone.
After the settings are saved, these numbers will both be shown as qualified numbers.
Dial-in ISDN
Number for 3G
Number for 3G
Allow IP-ISDN-IP
Prefer ISDN over IP
calls to these IP
Zones
calls to these IP
Zones
Lists of IP zones to which:
—
ISDN is preferred over IP.
—
IP is preferred over ISDN.
The lists are used when scheduling calls between IP zones. Move zones between
lists by selecting them and clicking the arrow buttons.
lists by selecting them and clicking the arrow buttons.
Prefer IP calls over
ISDN to these IP
zones
ISDN to these IP
zones
Table 6 IP Zone settings
Setting a Zone on One or More Systems
1.
Go to Administrative Tools > Locations > IP Zones.
2.
Hover over the IP Zone Name in the list, and use the drop-down menu to select Set On Systems.
3.
Choose the systems to associate with this particular IP zone.
4.
Click Save.
41
Cisco TelePresence Management Suite Administrator Guide
Routing