Cisco Cisco TelePresence Management Suite (TMS) Version 15 Maintenance Manual
4.
Click Upload.
Verify that the package is visible in the list on the Software Manager page.
Verify that the package is visible in the list on the Software Manager page.
Upgrading the Endpoints
1.
Go to Systems > System Upgrade > System Upgrade.
2.
Locate the endpoint(s) you want to upgrade by using the folder view, selecting an alternate listing from the
drop-down, or searching for the system on the Search tab.
drop-down, or searching for the system on the Search tab.
3.
Select the system(s) and click Next.
The Select Software and Release Keys page opens.
The Select Software and Release Keys page opens.
4.
Fill in:
—
The software version, using the drop-down list in the Software field.
—
The Date and Start Time you want for the scheduled upgrade.
—
For legacy systems a Release Key for the software may be required.
5.
Click Upgrade.
—
For systems on the organization's network, you can now verify that the upgrade has been scheduled or
initiated by going to Systems > System Upgrade > System Upgrade Activity Status.
initiated by going to Systems > System Upgrade > System Upgrade Activity Status.
—
Systems behind a firewall/NAT must now be booted. Cisco TMS will initiate the upgrade when receiving the
boot event.
See
boot event.
See
for background on how these upgrades work.
Applying the Same Upgrade to Endpoints with the Same Software Version
To select the same software file in the Software drop-down list for all systems with a similar software version:
1.
Choose Software on one system.
2.
Click the Apply to all link displayed to the right of the drop-down.
All systems affected will have the same software file selected and will be highlighted.
All systems affected will have the same software file selected and will be highlighted.
Purging a System
Cisco TMS differentiates between deleting and purging a system.
■
You can use a Delete operation to delete a system from a folder. It will still have an entry in the Cisco TMS
database and may appear in one or more additional folders.
database and may appear in one or more additional folders.
■
If you Purge a system, its database entry is permanently removed.
Using the Navigator
1.
Go to Systems > Navigator and locate a folder where the system is displayed.
2.
Check the system you want to remove.
3.
Click Delete.
A confirmation prompt is displayed asking you whether you want to delete the system from the folder or purge
it entirely from the database.
A confirmation prompt is displayed asking you whether you want to delete the system from the folder or purge
it entirely from the database.
4.
Click Purge.
Using the Purge Systems Page
1.
Go to Systems > Purge Systems.
2.
Select the system you want to remove.
67
Cisco TelePresence Management Suite Administrator Guide
Adding and Managing Systems