Cisco Cisco TelePresence Management Suite (TMS) Version 15 Maintenance Manual

Page of 288
Field
Description
Caller ID
Only applicable when the selected bridge is Cisco TelePresence MPS.
Enter the number the calling participant will be seen as by the bridge when receiving the call. 
Protect must be set to 
On for the conference for this field to be valid, causing only participants 
whose caller ID match the predefined list to be allowed to join.
The Protect setting can be configured:
 
in the MPS interface (
Overview > MCU > Create Conference
).
 
on the conference in Cisco TMS after the MPS has been added, on the 
MCU Settings 
tab.
 
in the MCU defaults for the system in Navigator.
ISDN 
Zone
Set ISDN and IP zones for the template. These fields are not applicable if an endpoint is specified 
in the template. For further details, see 
IP Zone
Table 112    Dial settings for participant templates (continued)
 
3.
If desired, go to the 
Identification
 tab, write a description of the template and associate it with a reference; see 
 for more information.
Adding a Participant Template to a Booking
When creating or modifying a booking:
 
1.
Click Add Participants.
 
2.
Click on the Templates tab.
 
3.
Select the participant template or templates to add.
 
4.
Click OK.
With any booking involving dial-in participants, make sure the required dial-in information is distributed to all participants.
Sample participant template Setups
Example 1: Third-party audio bridge
You frequently have to call a third-party telephone audio bridge as part of your scheduled calls that requires you to dial a 
set DTMF string when you connect.  
Template solution: 
 
 Protocol: 
ISDN – H320
 
Type: 
Audio
 
Direction: Dial-Out
 
Number: The telephone number of the bridge
 
 DTMF: All digits to dial upon connection  
Whenever this template is scheduled, an external ISDN dial out will be added to the conference with the number and 
DTMF fields already populated.
167
Cisco TelePresence Management Suite Administrator Guide
Booking