Cisco Cisco TelePresence Management Suite (TMS) Version 15 Maintenance Manual
5.
You can view the status of the job on the page
Systems > Configuration Templates > Configuration Template
Activity Status
, see
.
Creating a New Configuration Template from an Existing Template
1.
Hover over the template you want to copy from, open the drop-down menu and select Copy.
Cisco TMS will open the
Template Settings
page.
2.
Modify the name and settings of the configuration template as desired.
3.
Click Save.
Custom Configuration and Commands
For some systems, there is an option to add custom commands and configuration to the configuration templates. These
behave differently from the predefined settings.
behave differently from the predefined settings.
See the documentation for your system for the syntax.
■
For configuration, the systems use XML from the configuration.xml document.
■
For commands, the systems use XML from the command.xml document.
On Cisco TelePresence endpoints these files are available on the system's web server in the
Diagnostics
or
XML Files
section.
On Cisco VCS you can provide multiple custom configurations or commands by putting all of them in a single Command
or Configuration root tag.
or Configuration root tag.
An example of custom configuration for E20, MXP Series, C Series and EX Series that changes the system name to "Sys-
tem name test" is
tem name test" is
<Configuration><SystemUnit><Name>System name test</Name></SystemUnit></Configuration>
For Polycom HDX Endpoints you have the option of a
Custom Configuration
template setting. This template setting can
be used when editing and creating a new template. An unlimited amount of commands and configurations can be added
if you need functionality the stored settings do not provide. Separate the commands and configurations with a comma.
if you need functionality the stored settings do not provide. Separate the commands and configurations with a comma.
20
Cisco TelePresence Management Suite Administrator Guide
Setting up Cisco TMS