Cisco Cisco TelePresence Management Suite (TMS) Version 15 Maintenance Manual
Participant
Identifier
Identifier
n
Auto: Let the System Name of a participant to be displayed the number of seconds set in
Participant Identifier Timeout.
Participant Identifier Timeout.
n
On: Enable the System Name for each participant to be displayed in the picture during the
conference.
conference.
n
Off: Set to
Off
to disable the System Name to be displayed.
Lecture Mode
n
On: Set to
On
to enable the Lecturer to be displayed in full screen to the other participants.
The Lecturer is the participant which is assigned floor. The Lecturer will see a scan of all
the participants in a full screen view or one of the supported sub-picture views. To enable
the scan of other sites the CP Autoswitching must be set.
the participants in a full screen view or one of the supported sub-picture views. To enable
the scan of other sites the CP Autoswitching must be set.
n
Off: Set to
Off
to disable the Lecturer, the participant which is assigned floor, to be view in
full screen.
FUR Block Sites
n
FURBlock (Fast Update Request Block) if one or more sites are experiencing network
errors.
errors.
n
Auto: FUR's from sites that send too many will be blocked.
n
On: FUR's from all sites will be blocked.
Protect
n
On: Only predefined Protected Numbers are allowed to join this conference. The
Protected Numbers
field will be shown, and numbers can be configured from the Dial-in
Configuration in the
MCU Conference Overview
.
n
Off: Protect mode disabled.
Encoder
Selection Policy
Selection Policy
n
Best Bit Rate: Make the MPS prioritize the video quality for sites based on bit rate. The
system will move participants with a Low Video Rate to a secondary encoder, if it is
available. If no sites are moved, the system will move sites with Low Video Standard.
system will move participants with a Low Video Rate to a secondary encoder, if it is
available. If no sites are moved, the system will move sites with Low Video Standard.
n
Best Video Standard: Make the MPS prioritize sites based on video standard. The system
will move participants with a Low Video Standard to a secondary encoder, if it is available.
If no sites are moved, the system will move sites with Low Video Rate.
will move participants with a Low Video Standard to a secondary encoder, if it is available.
If no sites are moved, the system will move sites with Low Video Rate.
n
Best Resolution: Make the MPS prioritize the video quality for sites based on resolution.
The system will move participants with a Low Resolution to a secondary encoder, if it is
available. If no sites are moved, the system will move sites with low video rate.
The system will move participants with a Low Resolution to a secondary encoder, if it is
available. If no sites are moved, the system will move sites with low video rate.
Cisco TelePresence Conductor Settings
In Cisco TMS:
Booking > New Conference
Field
Description
Alias
Select the alias you want to use as your conference dial-in address.
The aliases displayed in the drop-down have been configured in
Systems > Navigator >
select
a TelePresence Conductor
> TelePresence Conductor
tab
> Aliases
. For reference, see
.
Table 104: Alias configuration settings
Cisco TelePresence Management Suite Administrator Guide (14.6)
Page 184 of 344
Booking
New Conference