Cisco Cisco TelePresence Management Suite (TMS) Version 15 Maintenance Manual
Settings
Field
Description
Name
Specify a name for the template.
Reusable
n
Yes: The template will be used as a model and can be added to conferences. For dial ins the
template can be used for one or several conferences several times. This disables the availability
check for this participant in Cisco TMS.
template can be used for one or several conferences several times. This disables the availability
check for this participant in Cisco TMS.
n
No: The template can only be added once to one conference at a time, but is possible to reuse in
a later conference. Cisco TMS availability checker will ensure that the template is used only once
by setting the participant it represents to in-use.
a later conference. Cisco TMS availability checker will ensure that the template is used only once
by setting the participant it represents to in-use.
Protocol
Specify the protocol that the system represented will use in the conference.
Type
n
Audio: Voice only, no picture.
n
Video: Both voice and picture.
Call
Restrict
Restrict
Specify whether the unmanaged system will dial or be dialed at a restricted bandwidth (56 kbps).
Endpoint
Specify an endpoint to book when using the template in a booking.
Direction
n
Dial Out: The MCU dials out to the unmanaged system.
n
Dial In: The MCU allocates a port so that the unmanaged system can dial in to the conference.
Bandwidth
The bandwidth to use for the unmanaged system.
Number
The ISDN number of the unmanaged participant. This field is the number the MCU dials out to the
unmanaged system. See the description of the field Direction. The field only applies for dial outs.
unmanaged system. See the description of the field Direction. The field only applies for dial outs.
It is possible to enter a non-qualified ISDN number if allowed by your telepresence setup.
Your telepresence setup may demand the use of a prefix or string.
Extension
Number
Number
If an extension number must be dialed to reach the unmanaged system, it must be entered here.
Only shown for dial outs.
Only shown for dial outs.
Second
Number
Number
Only displayed if the protocol is set to H.221 and a dial out has been configured.
DTMF
Tones
Tones
Any DTMF (Dual-tone Multi-Frequency signaling) tones to be dialed after connection must be
entered here.
entered here.
MCU
Specify which MCU to use when connecting to the unmanaged system.
MCU
Interface
Interface
Specify which MCU interface to use to connect to the unmanaged system. Examples of interfaces
are ISDN1 and ISDN2.
are ISDN1 and ISDN2.
Dial In
Method
(Only for
Dial Ins)
Method
(Only for
Dial Ins)
Only shown if dial in and MCU are chosen. Dial in methods include:
n
Conference Number: The Participant Template will use the common conference number, this
means that it will not have a unique number to dial.
means that it will not have a unique number to dial.
n
Participant Number per Conference: The Participant Template will have a unique number within
a conference. The number may change every time the Participant Template is in a conference.
a conference. The number may change every time the Participant Template is in a conference.
n
Participant Number Fixed: The Participant Template will have a unique number within a
conference. The number will always be the same for all conferences for this Template.
conference. The number will always be the same for all conferences for this Template.
Cisco TMS Administrator Guide (14.3.2)
Page 177 of 342
Booking
Participant Templates