Cisco Cisco TelePresence Management Suite (TMS) Version 15 Maintenance Manual
Field
Description
Send Warning
When Auto
Attendant
Conferences
Exceed This
Duration (in
seconds)
When Auto
Attendant
Conferences
Exceed This
Duration (in
seconds)
A conference event is triggered in Conference Control Center when the duration of an MCU
Auto Attendant conference has exceeded the set time limit (in seconds). Set to 0 to disable
(no event will be triggered).
Auto Attendant conference has exceeded the set time limit (in seconds). Set to 0 to disable
(no event will be triggered).
Automatic MCU
Failover
Failover
n
Off: Cisco TMS will not initiate automatic MCU failover.
n
If conference start fails: Cisco TMS will automatically try another MCU if conference setup
fails during conference start.
fails during conference start.
n
If conference start or MCU polling fails: Cisco TMS will automatically try another MCU if
conference setup fails during conference start, or if the MCU is unresponsive during the
conference. For failover threshold, see the field below. We do not recommend using this
setting, as Cisco TMS could disconnect all participants from a conference if the network
connection to the hosting MCU is lost for a short time, despite the conference having
continued with no problem.
conference setup fails during conference start, or if the MCU is unresponsive during the
conference. For failover threshold, see the field below. We do not recommend using this
setting, as Cisco TMS could disconnect all participants from a conference if the network
connection to the hosting MCU is lost for a short time, despite the conference having
continued with no problem.
Note: Automatic MCU Failover is only supported for scheduled, non-cascaded MCU
conferences.
conferences.
Automatic MCU
Failover Threshold
(seconds after
first poll failure)
Failover Threshold
(seconds after
first poll failure)
Specify the number of seconds Cisco TMS will wait after the first poll failure before MCU
failover is executed.
failover is executed.
Statistics Settings
In Cisco TMS:
Administrative Tools > Configuration > Statistics Settings
.
Field
Description
Statistics History (in days)
Set the default date range used for statistics. Only data for the last
Statistics History days will be shown by default.
Statistics History days will be shown by default.
Disable Statistics Report
Setting to Yes disables the
Reporting
tab where statistics can be
exported to PDF. This will speed up the reporting pages.
Statistics ROI Average System Cost The average investment cost for a video system, used in the calculator for
.
Statistics ROI Average Travelling
Cost
Cost
The average cost of a business trip.
Statistics ROI/CO
2
Average Number
of Participants per Endpoint
The average number of participants joining a video conference at each
endpoint.
endpoint.
Statistics ROI/CO
2
Minimum Call
Duration
Select a minimum duration in seconds for calls used in ROI statistics. All
calls below this limit will be ignored by the ROI statistics.
calls below this limit will be ignored by the ROI statistics.
Statistics CO
2
Cost Per Travel Per
person (kg CO
2
)
The average CO
2
cost of a business trip.
Statistics Default Start Time
The default start time for statistics.
Statistics Default End Time
The default end time for statistics.
Cisco TMS Administrator Guide (14.1)
Page 240 of 320
Administrative Tools
Configuration