Cisco Cisco TelePresence Management Suite (TMS) Version 15 Maintenance Manual
Setting the endpoint's external management address
You must set the external management address of Cisco TMS on the endpoint itself. Follow the instructions
in your endpoint's documentation to set:
in your endpoint's documentation to set:
n
ExternalManager Address to the address of the Cisco TMS server.
n
ExternalManager Path to
TMS/public/external/management/systemmanagementservice.asmx
TMS/public/external/management/systemmanagementservice.asmx
When the endpoint is plugged in at the remote location with the correct external management address:
n
Automatically discovered endpoints will be added to the default folder.
n
Pre-registered endpoints will populate their entries in Cisco TMS with additional system information, and
their system status will be set to Alive.
their system status will be set to Alive.
Adding Cisco Unified CM and registered endpoints
To add a Cisco Unified CM and endpoints registered to it to Cisco TMS, follow the procedures below in the
order they are listed.
order they are listed.
Preparing the Cisco Unified CM
Activate these services on the Cisco Unified CM node(s) you want to add to Cisco TMS before you start:
n
Cisco AXL Web Service on the Cisco Unified CM node.
n
Cisco RIS Data Collector on the Cisco Unified CM Publisher node.
n
Cisco CTIManager must be active on at least one of the nodes inside the Cisco Unified CM cluster.
for instructions on service activation.
Follow this procedure in Cisco Unified CM:
. Make sure to:
l
Save the credentials for the Cisco TMS initialization procedure that follows.
l
Assign all the rooms that you plan to use to the application user you create.
l
Assign all telepresence units to this user profile. The MAC Address of each unit and shared phone must
be added to the user profile. Adding an IP phone associated with the CTS to the application user is not
necessary.
be added to the user profile. Adding an IP phone associated with the CTS to the application user is not
necessary.
l
Add the "Standard CTI Secure Connection" group to the application user to secure Cisco TMS. (This
step is optional.)
step is optional.)
2. Create a user group in Cisco Unified CM for Cisco TMS.
3. Assign the following roles to this user group:
l
Standard AXL API Access
l
Standard CTI Enabled
l
Standard SERVICEABILITY
l
Standard CCM Admin Users
l
Standard RealtimeAndTraceCollection
4. Add the above application user to the newly created user group.
Cisco TMS Administrator Guide (14.1)
Page 64 of 320
Adding and managing systems
Adding systems