Cisco Cisco TelePresence Management Suite (TMS) Version 15 Maintenance Manual
Zones
Cisco TMS Administration Guide
Page 8 of 39
IP zones
To set up an IP Zone:
1. Go to Admini strative Tools > Locations > IP Zone s.
2. Click New.
3. Fill in the fields described below.
Field
Description
IP Zone Name
Specify the name of the IP zone
Gateway resource pool
ISDN Zone
By moving IP zones bet ween the two lists at the bottom of an IP zone, you can specify which IP zones
should be dialed using IP, and whic h IP zones should be dialed using IS DN.
should be dialed using IP, and whic h IP zones should be dialed using IS DN.
When setting up a conference with participants in different IP zones, Cisco TMS will try to include a
Cisco TelePresence MCU from the IP zone where the majority of the participants are situated.
Cisco TelePresence MCU from the IP zone where the majority of the participants are situated.
In the Gateway Res ourc e Pool settings you specify which prefixes to dial in order to use a gateway.
The IS DN Zone dropdown allows you to specify which IS DN Zone’s dialing rules should apply to the
gateway you want to use. The reason you specify the prefix rather than the gateway directly, is that
this allows for more flexibility in Cisco TMS. It means that you can use load-balanced gateways, and
even gat eways not supported by Cisco TMS.
The IS DN Zone dropdown allows you to specify which IS DN Zone’s dialing rules should apply to the
gateway you want to use. The reason you specify the prefix rather than the gateway directly, is that
this allows for more flexibility in Cisco TMS. It means that you can use load-balanced gateways, and
even gat eways not supported by Cisco TMS.
Note: This setting must be specified in order for the Gat eway Resource Pool to work.
Field
Description
URI Domain Name:
Add whic h domain name Cisco TMS should use for routing H323 calls
to this IP-zone when doing URI dialing.
to this IP-zone when doing URI dialing.
Note: Cisco TMS will always use URI dialing bet ween two locations
where this setting is filled in, thereby ignoring the IP/IS DN
preferences defined at the bottom of this page.
where this setting is filled in, thereby ignoring the IP/IS DN
preferences defined at the bottom of this page.
Gateway Auto Prefix:
Specify the prefix to use to get an outside IS DN line through the
gateway for video calls.
gateway for video calls.
Gateway Telephone Prefix:
Specify the prefix to use to get an outside IS DN line through the
gateway for telephone calls.
gateway for telephone calls.
Gateway 3G Prefix:
Specify the prefix to use to get an outside 3G line through the 3G
gateway for 3G calls.
gateway for 3G calls.
Dial-in ISDN Number:
Specify the TSC4 number that will be used for dialing into endpoints
through a gateway. Cisco TMS will automatically generat e the entire
number for a call containing the gateway’s TS C4 number followed by
the star and the endpoint’s E164 alias.
through a gateway. Cisco TMS will automatically generat e the entire
number for a call containing the gateway’s TS C4 number followed by
the star and the endpoint’s E164 alias.
Dial-in ISDN Number for
3G:
3G:
Specify the TSC4 number that will be used for dialing into endpoints or
Cisco TelePresence MCU through a 3G gateway. Cisco TMS will
automatically generate the entire number for a call containing the
gateway’s TS C4 number followed by the star and the endpoint’s E164
alias.
Cisco TelePresence MCU through a 3G gateway. Cisco TMS will
automatically generate the entire number for a call containing the
gateway’s TS C4 number followed by the star and the endpoint’s E164
alias.
Allow IP-ISDN-IP:
Check this option to allow Cisco TMS to schedule calls from an IP only
endpoint out through an IP -IS DN gateway to an IP only endpoint in via
an IS DN-IP gateway. The set-up time for this type of calls can be close
endpoint out through an IP -IS DN gateway to an IP only endpoint in via
an IS DN-IP gateway. The set-up time for this type of calls can be close