Cisco Cisco MeetingTime Quick Setup Guide

We recommend that you do the following:

Create a SIP trunk security profile in Cisco Unified Communications Manager specifically for 
Cisco Unified MeetingPlace.

Apply this SIP trunk security profile to SIP trunks to Cisco Unified MeetingPlace systems.

This task applies only in Cisco Unified Communications Manager environments.

You perform this task in the Cisco Unified Communications Manager Administration pages. 
Because the pages and menus vary by release, you should check the Cisco Unified 
Communications Manager online help for step-by-step instructions for your specific release. 

Go to http://ccm-server/, where ccm-server is the fully-qualified domain name or IP address of the 
Cisco Unified Communications Manager server.

Sign in with your Cisco Unified Communications Manager administrator username and password.

Click System > Security Profile > SIP Trunk Security Profile.

Click Add New.

Configure fields described in 

Name

Enter a name, such as SIP Trunk Security Profile for Cisco  Unified 
MeetingPlace.

Device Security Mode

Select Non Secure.

Incoming Transport Type

Keep the default value of TCP+UDP.

If other values are available for this field, then you may instead 
select the value that matches the 

 setting for this 

Cisco Unified Communications Manager node on the 

.

Outgoing Transport Type

We recommend that you select UDP.

Enable Digest Authentication

Uncheck this check box.