Cisco Cisco MeetingTime Quick Setup Guide

Select the Cisco CallManager service.

Find the Maximum Call Duration Timer field.

Modify this field only if you require meetings to last longer than the previously configured value. 

A value of 0 disables the timer, which is recommended for continuous meetings where individual 
calls, as opposed to the meeting as a whole, need to continue indefinitely. Note that disabling this 
timer might result in some calls failing to ever terminate in cases where some call signaling failure 
occurs.

For descriptions of this or any other field on the page, click the field name.

Click Save if you modified any parameters.

 module 

 module 

In Cisco Unified MeetingPlace, video calls cannot exceed the lowest maximum bandwidth determined 
by the following settings:

 field on the 

Video Call Bandwidth region parameter in Cisco Unified Communications Manager.

Bandwidth capabilities and configurations of the video endpoints.

This task describes how to view and (if necessary) modify the Video Call Bandwidth in Cisco Unified 
Communications Manager. 

This task applies only in Cisco Unified Communications Manager environments.

You perform this task in the Cisco Unified Communications Manager Administration pages. 
Because the pages and menus vary by release, you should check the Cisco Unified 
Communications Manager online help for step-by-step instructions for your specific release. 

Go to http://ccm-server/, where ccm-server is the fully-qualified domain name or IP address of the 
Cisco Unified Communications Manager server.

Sign in with your Cisco Unified Communications Manager administrator username and password.

Click Device > Trunk.

Click Find with or without any search parameters to find the trunks that carry Cisco Unified 
MeetingPlace calls, for example:

SIP trunk to Cisco Unified MeetingPlace