Cisco Cisco TelePresence MCU 4510 Maintenance Manual
Displaying System Status
Displaying General Status
The General status page displays an overview of the MCU status. To access this information, go to Status > General.
Refer to the table below for details of the information displayed
Field
Field Description
System status
Model
The specific MCU model.
Serial number
The unique serial number of the MCU.
Software
version
version
The installed software version. You will need to provide this information when speaking to
Customer support.
Customer support.
Build
The build version of installed software. You will need to provide this information when speaking
to Customer support.
to Customer support.
Uptime
The time since the last restart of the MCU.
Host name
The host name assigned to the MCU. You can change the host name at Network > DNS.
Slot number in
chassis
chassis
The slot number in the chassis in which the MSE 8000 blade is currently installed.This field is
only visible if the MCU is a blade.
only visible if the MCU is a blade.
If the MCU displays a message reporting that the blade is missing, ensure that each blade is
firmly secured in the chassis. Close both retaining latches on the front of the blade. Using a
number 1 Phillips screwdriver, tighten the screws in the retaining latches with a clockwise
quarter turn.
firmly secured in the chassis. Close both retaining latches on the front of the blade. Using a
number 1 Phillips screwdriver, tighten the screws in the retaining latches with a clockwise
quarter turn.
IP address
The local IP address of the MCU network interface used to access the MCU web user interface.
CPU load
The current processor utilization of the MCU.
Cisco Systems, Inc.
188