Cisco Cisco Catalyst 6000 Multilayer Switch Feature Card MSFC2 Installation Guide

Proceed to the software configuration for your NM-1VSAT-GILAT network module. See the

Cisco IOS feature module. 

This section describes how to replace the NM-1VSAT-GILAT network module in your router. Complete 
one of the following tasks, depending on whether or not your router supports online insertion and 
removal (OIR):

The online insertion and removal (OIR) feature enables some Cisco modular access routers to support 
the replacement of network modules without switching off the router or affecting the operation of other 
interfaces. Also, routing information is maintained during OIR of network modules.

If your router does not support OIR, do not perform this task to replace your NM-1VSAT-GILAT 
network module. Instead, go to the 

Only the Cisco 3745 and Cisco 3845 routers support OIR of the NM-1VSAT-GILAT network 
module.

All connections made through the NM-1VSAT-GILAT network module are reset during OIR.

You must perform OIR with similar modules. If you remove a network module, install another 
network module exactly like it in its place.

127468

NM-1VSAT

GILAT

Step 1

Step 2