Cisco Cisco uBR-MC3Gx60V-RPHY Broadband Processing Engine Installation Guide

To remove a lead screw that has broken off in the faceplate of the card, complete the following steps:

Remove the cable bundle and UCH from the faceplate.

Take hold of the entire bundle of cables with one hand, and hold the card in place with the other.

Pull the cables and UCH away from the card. 

If the UCH does not immediately come away from the faceplate, gently wiggle the UCH up 
and down while at the same time pulling it away from the faceplate.

Inspect the screw hole and blow away any debris.

Insert a small flathead screwdriver into the leadscrew hole.

Press down and rotate the screwdriver counterclockwise until the broken part of the lead screw emerges 
from the hole.

Use your fingers or needle-nose pliers to rotate the leadscrew the rest of the way out of the hole.

The following tables provide specification information for the Cisco uBR10-MC5X20S/U/H cable 
interface line cards.

 lists the physical specifications for the Cisco uBR10-MC5X20S/U/H cable interface line cards.

Card dimensions

Width: 1.36 in (3.55 cm)

Height: 20 in. (50.80 cm)

Depth: 16 in. (10.64 cm)

Weight

16 lb (7.26 kg)

Cisco uBR10-MC5X20S
Cisco uBR10-MC5X20U
Cisco uBR10-MC5X20H

185W

1

 (631.2 BTU/hr

2

)

175W 

(597.1 BTU/hr)

185W (631.2 BTU/hr)

Cisco uBR10-MC5X20S
Cisco uBR10-MC5X20U
Cisco uBR10-MC5X20H

185W (631.2 BTU/hr)
175W 

(597.1 BTU/hr)

185W (631.2 BTU/hr)