Cisco Cisco Fiber IGESM Switch Module for IBM Release Notes
18
Release Notes for the Cisco Systems Intelligent Gigabit Ethernet Switch Modules for the IBM BladeCenter
43W7806
Documentation Updates
Protected Mode Guidelines and Restrictions
These guidelines and restrictions apply to protected mode:
•
Protected mode must be enabled on the chassis management module before you enter this command
on the blade switch. For information about enabling protected mode on the chassis management
module, see the management module documentation at this URL:
on the blade switch. For information about enabling protected mode on the chassis management
module, see the management module documentation at this URL:
http://www-03.ibm.com/servers/eserver/support/bladecenter/index.html
•
After protected mode is operational on the switch, the management module cannot configure or
administer the blade switch.
administer the blade switch.
•
The blade switch must be rebooted for protected mode to become operational.
•
Protected mode remains active even when the switch is moved to another chassis.
•
Recovery from lost passwords requires direct access through the external serial port on the switch.
Beginning in privileged EXEC mode, follow these steps to enable protected mode and prevent the
management module from controlling the switch:
management module from controlling the switch:
To disable protected mode and return control of the blade switch to the management module, enter the
no platform chassis-management protected-mode.
no platform chassis-management protected-mode.
Command
Purpose
Step 1
configure terminal
Enter global configuration mode.
Step 2
platform chassis-management protected-mode Enable the switch to block control from the management
module.
Step 3
exit
Return to global configuration mode.
Step 4
end
Return to privileged EXEC mode.
Step 5
show platform summary
Verify that protected mode will be enabled on the next reboot.
Note
After rebooting the switch, enter the show platform
summary user EXEC command to verify that protected
mode is operations.
summary user EXEC command to verify that protected
mode is operations.