Cisco Cisco Unified IP Interactive Voice Response (IVR) 8.0(1) Administrator's Guide

3-2

Cisco Unified Communications Operating System Administration Guide for Cisco Unifed CCX Release 8.0(1)

Chapter 3 Status and Configuration

Hardware Status

To view the hardware status, follow this procedure:

Procedure

Step 1

From the Cisco Unified Communications Operating System Administration window, navigate to Show >
Hardware.

The Hardware status window displays.

Step 2

For descriptions of the fields on the Hardware Status window, see

Table 3-2

Network Configuration

The network status information that displays depends on whether Network Fault Tolerance is enabled.
When Network Fault Tolerance is enabled, Ethernet port 1 automatically takes over network
communications if Ethernet port 0 fails. If Network Fault Tolerance is enabled, network status
information displays for the network ports Ethernet 0, Ethernet 1, and Bond 0. If Network Fault
Tolerance is not enabled, status information displays only for Ethernet 0.

To view the network status, follow this procedure:

Procedure

Step 1

From the Cisco Unified Communications Operating System Administration window, navigate to Show >
Network.

The Network Settings window displays.

Step 2

See

Table 3-3

for descriptions of the fields on the Network Settings window.

Table 3-2

Hardware Status Field Descriptions

Field

Description

Platform Type

Displays the model identity of the platform server.

Serial Number

Displays the serial number of the platform server.

Processor Speed

Displays the processor speed.

CPU Type

Displays the type of processor in the platform server.

Memory

Displays the total amount of memory in MBytes.

Object ID

Displays the object ID.

OS Version

Displays the operating system version.

RAID Details

Displays details about the RAID drive, including controller information,
logical drive information, and physical device information.