Cisco Cisco Application Extension Platform for SRE
Cisco Application eXtension Platform 1.0 Quick Start Guide
Packaging Applications on Cisco AXP
8
Cisco Application eXtension Platform 1.0 Quick Start Guide
OL-15669-01
Figure 1
Cisco 280x ISR and Cisco AXP Service Module Configuration
To familiarize yourself with the command modes, see the
.
Packaging Applications on Cisco AXP
To package your applications on Cisco AXP, perform the steps in the following sections.
•
•
•
•
•
Preparing the Development Platform
The Cisco AXP SDK runs most cleanly on Fedora Core 4 Linux. The machines used in examples for this
quickstart guide have Fedora Core 4 Linux builds.
quickstart guide have Fedora Core 4 Linux builds.
Begin your development exercise by setting up the four basic directory structures in the following
example.
example.
Preparing the Development Platform: Example
This guide uses the directory structure shown below:
opt/
/axp_#/
/keys
/tcptrace
/output
defines the directories used in this guide’s examples.
270421
IP address
192.168.2.1/24
ISE1/0 = Integrated-
service-engine1/0
Service module
IP address
192.168.2.2/24
service-module
ip default-gateway
192.168.2.1
Cisco 28xx ISR
Cisco AXP service module (AIM or NME)
Gigabit Ethernet
ISE1/0
eth0