Cisco Cisco AP541N Wireless Access Point Maintenance Manual
3
Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide
42
describes the fields to view or configure on the LAN Settings page.
Table 7 LAN Settings Field Descriptions
Field
Description
Hostname
DNS name (host name) for the access point.
The DNS name has the following requirements:
•
Maximum of 20 characters
•
Only letters, numbers and dashes. Double quote (") is
not a valid character.
not a valid character.
•
Must start with a letter and end with either a letter or a
number
number
MAC Address
MAC address for the Ethernet port on this access point. This
is a read-only field that you cannot change.
is a read-only field that you cannot change.
Management
VLAN ID
VLAN ID
Enter a number between 1 and 4094 for the management
VLAN ID used on your network.
VLAN ID used on your network.
The default management VLAN ID is 1.
Untagged VLAN
Enable or disable VLAN tagging. If you enable the untagged
VLAN, all traffic is tagged with a VLAN ID.
VLAN, all traffic is tagged with a VLAN ID.
By default all traffic on the access point uses VLAN 1, the
default untagged VLAN. This means that all traffic is
untagged until you disable the untagged VLAN, change the
untagged traffic VLAN ID, or change the VLAN ID for a VAP or
client using RADIUS.
default untagged VLAN. This means that all traffic is
untagged until you disable the untagged VLAN, change the
untagged traffic VLAN ID, or change the VLAN ID for a VAP or
client using RADIUS.
Untagged VLAN
ID
ID
Provide a number between 1 and 4094 for the untagged
VLAN ID. Traffic on the VLAN that you specify in this field is
not tagged with a VLAN ID.
VLAN ID. Traffic on the VLAN that you specify in this field is
not tagged with a VLAN ID.
Connection
Type
Type
If you select DHCP, the access point acquires its IP address,
subnet mask, DNS, and gateway information from a DHCP
server.
subnet mask, DNS, and gateway information from a DHCP
server.
If you select Static IP, you must enter information in the Static
IP Address, Subnet Mask, and Default Gateway fields.
IP Address, Subnet Mask, and Default Gateway fields.