Cisco Cisco AP541N Wireless Access Point 관리 매뉴얼

3

Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide

42

 

 describes the fields to view or configure on the LAN Settings page.

Hostname

DNS name (host name) for the access point.

The DNS name has the following requirements:

•

Maximum of 20 characters

•

Only letters, numbers and dashes. Double quote (") is 
not a valid character.

•

Must start with a letter and end with either a letter or a 
number

MAC Address

MAC address for the Ethernet port on this access point. This 
is a read-only field that you cannot change.

Management 
VLAN ID

Enter a number between 1 and 4094 for the management 
VLAN ID used on your network.

The default management VLAN ID is 1.

Untagged VLAN

Enable or disable VLAN tagging. If you enable the untagged 
VLAN, all traffic is tagged with a VLAN ID.

By default all traffic on the access point uses VLAN 1, the 
default untagged VLAN. This means that all traffic is 
untagged until you disable the untagged VLAN, change the 
untagged traffic VLAN ID, or change the VLAN ID for a VAP or 
client using RADIUS.  

Untagged VLAN 
ID

Provide a number between 1 and 4094 for the untagged 
VLAN ID. Traffic on the VLAN that you specify in this field is 
not tagged with a VLAN ID.

Connection 
Type

If you select DHCP, the access point acquires its IP address, 
subnet mask, DNS, and gateway information from a DHCP 
server.

If you select Static IP, you must enter information in the Static 
IP Address, Subnet Mask, and Default Gateway fields.